Dovetail red dot sight mount for CZ Shadow 2, SP-01 Phantom, 85, 97, P01 and PCR handguns. Fits red dot sights with the Docter/Noblex footprint, such as Vortex Venom/Viper, Burris Fastfire, Sightmark Mini Shot / Core Shot and many others. Mounting hardware is included.

Compatibility

• CZ 75
• CZ 75 SP-01
• CZ 75 SP-01 Phantom
• CZ 75 SP-01 Shadow*
• CZ 85
• CZ 97B
• CZ 97D
• CZ P-01
• CZ PCR (there will be a gap under the front of the adapter plate)
• Tristar P120

This mount does NOT fit

• CZ P-07
• CZ P-09

Compatible red dot sights (list not exclusive)

• Vortex Viper
• Vortex Venom
• Burris FastFire 2/3/4
• Docter
• ADE RD3-001
• ADE RD3-002
• ADE RD3-009
• UTG Reflex Micro Dot
• Crimson Trace CTS-1200
• Crimson Trace CTS-1300
• Sightmark Mini Shot M-Spec

Specifications

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.811"
• Overall Width: .99"
• Torque Specs: 15 in/lbs

Installation

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.

• Remove the rear sight*
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite #242 threadlocker to the provided mounting screws
• Torque mounting screws to 15in/lbs